How to screen record with audio on a Mac: system sound and mic

PrintScreenly is a Mac screen recorder built for the recording that keeps coming out with your voice and none of the Mac's own sound. Press ⇧⌘R, drag over an area, and it records the Mac's sound and your microphone into one MP4. It runs on Macs with Apple silicon only, and it needs a plan.

  • No audio driver to install: the Mac's sound arrives through macOS's own screen capture.
  • SYS and MIC: switch either sound off and on while you record, each with a level meter.
  • Pause, then Resume: it's still one file at the end.

Needs macOS 14 or later.

Your options on a Mac

  • Built in

    The Screenshot toolbar on macOS 27 or later

    Cost
    Included with macOS
    Good for
    Recording the entire screen, a selected window or a selected portion with the Mac's own sound: press Shift-Command-5, click Options and choose Include System Audio. Options is also where you choose a microphone.
    The catch
    It saves a .mov file, and Apple's page describes no way to pause. Apple adds that some apps, such as the Apple TV app, might not let you record their windows.

    Apple Support: How to record the screen on Mac

  • Built in

    The Screenshot toolbar and QuickTime Player on macOS 26 and earlier

    Cost
    Included with macOS
    Good for
    Recording the screen with your voice over it. Apple's steps for both have you choose a microphone.
    The catch
    Apple lists Include System Audio for macOS 27 or later; its guide for macOS 26 lists a microphone and no system audio.

    Apple Support: Take a screenshot or screen recording on Mac (Mac User Guide for macOS 26)

  • Free

    BlackHole, a virtual audio driver

    Cost
    Free and open source
    Good for
    Passing the Mac's sound to an app that records. Its README has you set up a Multi-Output Device, make it the sound output, then set the recording app's input to BlackHole.
    The catch
    Its own FAQ says macOS does not support changing the volume of a Multi-Output device, and that the built-in output must be enabled and listed as the top device.

    BlackHole on GitHub: the project's README and its FAQ

  • Free

    OBS Studio

    Cost
    Free and open source
    Good for
    Recording desktop audio on macOS 13 and later with its macOS Audio Capture source: all of it, or one application's.
    The catch
    On older versions of macOS, OBS says you will require additional software to capture desktop audio.

    OBS Studio: macOS Desktop Audio Capture Guide

  • Our app

    PrintScreenly

    Cost
    $9.99/mo, or every premium Bravely utility for $95.99/yr or $399 once
    Good for
    System sound and your microphone in one MP4 with nothing extra to install, including on the macOS versions where the built-in recorder takes a microphone only.
    The catch
    It's paid, and it's for Apple silicon.

How to screen record on a Mac with audio using PrintScreenly

  1. Install it and sign in

    Download PrintScreenly for Mac, install it and sign in with your Bravely Account.

    Setup has you take a first screenshot, then shows the plans if your account doesn't have one.

  2. Check the audio settings

    Click PrintScreenly's icon in the menu bar, choose Settings… and open Recording.

    Under Audio, Include system audio by default and Include microphone by default are both on to begin with. Microphone input starts on System default; pick a named microphone if you have more than one. Under Video, Frame rate is 30 fps or 60 fps.

  3. Press ⇧⌘R and drag

    Press ⇧⌘R and drag over the area you want to record. To record a whole display, put your pointer on it and press ⌥⇧⌘R.

    The first time, PrintScreenly asks Include your microphone? Choose Continue, or Record without mic. macOS's own question about the microphone comes with your first capture, usually the screenshot in setup: choose Allow there.

    You can also start from the bar: press ⌘⇧1, then 5 for Region or 6 for Fullscreen under Record. The menu bar menu has Record Region and Record Fullscreen.

  4. Use SYS, MIC and pause

    The recording bar shows the time and the size of the file so far. SYS is the Mac's sound and MIC is your microphone: click either to switch it off, and again to bring it back. The meters beside them show what is coming in.

    The pause button holds the recording and turns into a play button, named Resume when you point at it. Both sounds are still switched on when you carry on.

  5. Stop, and find the file

    Click the square stop button, press the shortcut you started with, or choose Stop Recording in the menu bar menu.

    The file is in your Movies folder, inside PrintScreen.ly, with a name like PrintScreenly Recording 2026-11-18 at 14.05.09.mp4.

Why a Mac screen recording has no sound

Until macOS 27, the Mac's recorder had one audio choice: a microphone. Apple's instructions say that to record your voice or other audio with the screen recording, you choose a microphone. So the recording has your narration, and whatever the Mac was playing is missing.

Apple's current page adds one line that changes this: to record system audio with the screen recording in macOS 27 Golden Gate or later, choose Include System Audio. If you're on macOS 27, try that first. It costs nothing, it's already there, and it can record a single window, an option Apple lists from macOS 26.

QuickTime Player doesn't get round it on older versions. Apple says File > New Screen Recording opens either the same Screenshot controls or QuickTime Player's own Screen Recording window, and that window's audio setting is a microphone too.

The free routes on macOS 26 and earlier

Both free routes work. They differ in where the effort goes.

BlackHole describes itself as a virtual audio loopback driver that lets applications pass audio to other applications. You keep the app you record with, and the work moves into the Mac's sound settings: the Multi-Output Device you set up becomes the Mac's sound output for the recording.

OBS Studio goes the other way. On macOS 13 or later it needs no driver, and you learn a new app instead. It also runs on Macs that PrintScreenly doesn't.

What PrintScreenly records, and what the file is

PrintScreenly takes the Mac's sound from the same macOS screen capture that gives it the picture, so there is no driver, no Multi-Output Device and nothing to undo. Your microphone is mixed with it into a single audio track.

It needs two macOS permissions: Screen Recording for the picture and the Mac's sound, and Microphone for your voice. macOS may also ask once to let PrintScreenly reach your screen and audio directly: choose Allow.

Recordings save as MP4 with H.264 video. The app's own estimate is roughly 30 MB per minute at 1080p and 30 fps. If the Mac can't write that format, the app falls back to a .mov file.

Max duration, under Limits in the Recording settings, is where the length is set: recordings stop by themselves at that length, 10 minutes to begin with, and the slider runs from 30 seconds to 60 minutes. A recording of a picture that isn't changing at all stops at its next change instead. Choose… in the same settings sends new files to another folder.

What PrintScreenly doesn't do on a Mac

  • It doesn't run on Macs without Apple silicon, or on macOS 13 and earlier. OBS Studio supports macOS 13.0 or newer.
  • It stops at the Max duration, or at the next change on screen when the picture was completely still, and 60 minutes is as high as that goes.
  • It records an area or a whole display. For one window by itself, the Mac's own recorder has Record Selected Window.
  • No camera picture, no GIF and nothing to cut the clip afterwards.
  • The video file stays on your Mac. It isn't sent to your account and it isn't in the library, which holds screenshots.
  • It doesn't start until you're signed in to a Bravely Account with an active plan. On macOS 27 the built-in recorder covers system sound at no cost.

FAQs

Why is there no sound on my Mac screen recording?

On macOS 26 and earlier, the built-in recorder's only audio choice is a microphone, so the Mac's own sound isn't recorded. On macOS 27 or later, press Shift-Command-5, click Options and choose Include System Audio.

How do I record internal audio on a Mac?

On macOS 27 or later, with Include System Audio in the built-in recorder. On earlier versions, with a virtual audio driver such as BlackHole, with OBS Studio on macOS 13 or later, or with PrintScreenly on a Mac with Apple silicon.

Can QuickTime Player record the screen with computer audio?

Apple's steps for QuickTime Player's Screen Recording window offer a microphone as the audio source. On a Mac where File > New Screen Recording opens the Screenshot controls instead, the options are that toolbar's.

Can I record system audio and my microphone at the same time on a Mac?

PrintScreenly records both and mixes them into one audio track; both are on unless you switch one off. For macOS 27, Apple's page lists a microphone and Include System Audio as two choices under Options.

Is there a free way to screen record on a Mac with audio?

Yes. On macOS 27 or later the built-in recorder does it. On macOS 13 or later, OBS Studio is free and captures desktop audio. PrintScreenly is paid.

Which Macs does PrintScreenly run on?

Macs with Apple silicon, on macOS 14 or later.

PrintScreenly icon

PrintScreenly

Screenshots & recordings

$9.99/mo, or every premium Bravely utility for $95.99/yr or $399 once.